Double or single action, centre hung or offset pivot, suitable for aluminium or steel doors.

Natural satin silver anodised. Manufactured from zinc plated steel.

25mm backset model: 195mm x 25mm x 41mm

30mm backset model: 195mm x 25mm x 46mm

Steel case and mechanism, zinc plated for resistance to corrosion.

5 ply laminated steel bolt with concealead hardened steel roller pin, resists hacksaw attacks.

13mm x 20mm bolt throw.

Available in flat or radius profile also radius face with woolpile.

Locks can be secured in place using 33mm mounting bridges.

Accepts standard 17mm europrofile cylinders. Escutcheons available in: natural silver anodised, dark bronze or mill finish, for customers own treatment. Designed for M5 fixings, not supplied.

Hook locks suitable for centre hung, offset pivot or sliding aluminium or steel doors.

Case dimensions: 174.5mm x 41mm x 25.4mm, including faceplate.

Steel case and mechanism, zinc plated for resistance to corrosion.

5 ply laminated steel hook bolt with case hardened centre to resist hacksaw attacks.

Lock case accepts standard round 1-5/32” mortice key or thumb turn with cam type cylinders. Blank cylinders also available.

Case dimensions: 175mm x 45mm x 25.4mm including faceplate.

28mm backset for euro profile cylinder.

Hand may be specified but are field reversible.

Key controlled dogging.

Steel case and mechanism, zinc plated for resistance to corrosion.

Latch bolt dimensions: 25.4mm x 12.7mm, chrome plated with anti pick auxillary bolt.

Lock case accepts standard round 1-5/32” mortice key or thumb turn with cam type cylinders. Blank cylinders also available.

Case dimensions: 175mm x 45mm x 25.4mm including faceplate.

28.6mm backset for standard round cylinders.

Hand may be specified but are field reversible.

Key controlled dogging.

Steel case and mechanism, zinc plated for resistance to corrosion.

Latch bolt dimensions: 25.4mm x 12.7mm, chrome plated with anti pick auxilliary bolt.

The 2100 latch lock with round cylinder is designed to accept the Axim paddle handle, lever handle and range of cylinders and thumb turns. Latch strike plates available in stainless steel finish.

Lock case accepts standard round 1-5/32” mortise key or thumb turn with cam type cylinders. Blank cylinders also available.

The 2100 series push/pull paddle handle is designed to operate the 2100-40R series latch lock via a cam plug supplied.

The handle can be fitted to either side of the door, and a standard rim cylinder can be fitted to the reverse side for access.

Secured in the latch body by cylinder set screw. It is also rigidly tied to lever handle escutcheon by steel pins.

The paddle handle is satin silver anodised aluminium.

Satin black aluminium housing, with zinc plated steel internal components.

Specify hand required. Handing may be reversed by removing the spring clip and turning the cam plate over.